Description

Technical Parameters

RESIN APPLICATION

product-2041-2524

TEMP

Available in three colors: A1, A2 and A3, used for chairside digital processing and biocompatible It has good resistance, can be sterilized by high temperature and high pressure, has high hardness, good toughness, smooth surface and can be polished.After being varnished, the lifelikeness is high, and it is environmentally friendly and odorless.

Model: temporary crown

Strength:>100mpa

Absorption rate: <40

Meltability: <7.5

Wavelength: 405nm

Modulus:＞2300MPa

Temperature: 20~25℃

Color: A1/A2/A3

Natural translucent shades can be aesthetically modified for single crown and bridge restorations

The temporary restoration provides a high degree of stability and excellent marginal sealing.

Easy to polish, producing a high surface quality and excellent wear resistance.

CROWN

The highest fracture stability during the entire wearing time;

Quick and easy cleaning process;

The surface has minimal chalking and is easy to sand and polish.

Model: permanent crown

Strength:>100mpa

Absorption rate: <40

Meltability: <7.5

Wavelength: 405nm

Modulus:＞2800MPa

Temperature: 20~25℃

Color: A1/A2/A3

A variety of shades with a natural beauty, with matching translucency and opacity.

The restoration has optimal dimensional stability due to maximum resistance to bending and wear.

Due to the low water absorption, there will be no discoloration during crown formation.

IMPLANTATION GUIDE

It has good biocompatibility, can be sterilized by high temperature and high pressure, is highly transparent and hard, and has small shrinkage.

Materials allow for maximum visibility, coupled with high-resolution 3D printing for precise positioning.

Model: Implantation guide plate

Strength: >75Mpa

Absorption rate: <32

Meltability: <5

Wavelength: 405nm

Modulus:＞1650MPa

Temperature: 20~25℃

Color: transparent

The completely transparent material allows reliable control of the working area during drilling.

Used to print the hard resin parts of orthodontic appliances.

Precise positioning and fixation of the drill sleeve enables safe patient positioning.

DENTURE

Impact-resistant denture base is 3D printed with light-curing resin.
High impact resistance and high wearing comfort.
Quick to process and easy to polish.

Model: denture

Strength:＞65Mpa

Absorption rate: <32

Meltability: <1.6

Wavelength: 405nm

Modulus:＞2000MPa

Temperature: 20~25℃

Color: pink

Color and clarity work best with classic denture resin.

High impact strength provides extremely high fracture stability durability and ensures long-lasting functionality throughout the entire wear period.

The printed resin is fully compatible with the target denture.

SPLINTMASTER

Flexible splints, retainers, mouthguards and bruxing pads are 3D printed

with light-curing resin. Flexible and break-resistant, comfortable and

tension-free to wear, easy to polish.

Model: Night grinding braces

Strength: >40

Hardness: >75

Absorption rate: <32

Wavelength: 405nm

Tensile rate: >20%

Temperature: 20~25℃

Color: transparent

Transparent, colorless, flexible padding with ultra-high wearing comfort.

Wide range of uses, such as bite splints, mouth guards, bite splints, anti-snoring devices.

Flexible closing pads are extremely easy to maintain, clean and polish.

REPAIR MODEL

Combined with a high-precision 3D printer, teeth can be printed with ultrahigh precision and surface finish. Even if the mold is used repeatedly, checking the bite will not cause wear on the contact surface. Suitable for implant models, fixed repair models, etc. that require high precision.

Model: Restoration Model

Strength:＞90Mpa

Hardness:＞82

Meltability: <2

Wavelength: 405nm

Modulus:＞2000MPa

Temperature: 20~25℃

Color: yellow/grey

The material's technical properties meet all requirements for color and its appearance and feel.

Further increases in mechanical strength promote functional optimization.

Incorporated into the digitalization process for 3D reproduction of functional model parts.

WAX RESIN

3D printed gum implants are used to replace traditional manual gum glue, which has high elasticity and toughness. Good, tear-resistant and other characteristics, environmentally friendly and odorless.

Model: wax type resin

Strength:＞90Mpa

Annealing temperature: 1 h @ 800 °C

Combustion residue: < 0,1 %

Wavelength: 405nm

Modulus:＞1700MPa

Temperature: 20~25℃

Color: green

Precise and distortion-free results even for fine structures.

It has extremely low thermal expansion coefficient during combustion and can completely Melts without leaving any residue, ensuring a smooth surface for the casting wax pattern.

No sand holes and a very small expansion rate allow the metal teeth to maintain high-quality shape after casting.

BONDING TRAYS

Developed high-quality resin material, independently developed formula, super hardness, extremely small Shrinkage rate, combined with highprecision 3D printer, prints with ultra-high precision and smooth surface Perfect dental mold with cleanliness.

Model: Orthodontic

Strength:＞60Mpa

Hardness: 80D

Linear shrinkage: 0.85~1.0%

Wavelength: 405nm

Modulus:＞1500MPa

Temperature: 20~25℃

Color: yellow

Super hardness ensures no wear and tear with repeated use.

The material's extremely low shrinkage ensures printing dimensional accuracy

Precise surface smoothness shows perfect detail, and the surface can be steam cleaned.

GINGIVAL

3D printed gum implants are used to replace traditional manual gum glue, which has high elasticity and It has the characteristics of good toughness, tear resistance, environmental protection and odorless.

Model: Gum resin

Strength: >3Mpa

Hardness:＞70D

Shrinkage: 0.85~1.0%

Wavelength: 405nm

Elongation: >90%

Temperature: 20~25℃

Color: yellow

Remains malleable after long-term storage.

The finished artificial gums have no annoying or uncomfortable odor.

Incorporated into the digital process for 3D reproduction of functional gingival model components.

product-790-1067

Hot Tags: dental resin, China dental resin manufacturers, suppliers, paraffin wax for broken tooth, digital removable prosthetics, resin composite 2s, implant supported crown CAD, CE certified dental design lab, in house digital ortho lab

Dental Resin